Operation and Controls
NOTE: If the appliance is unplugged, encounter power interruption, or turned off, you must wait 3
SETTING THE TEMPERATURE CONTROL
∙During normal operation, the temperature display on the control panel shows the temperature inside the appli- ance.
∙The unit has two separate temperature zones. For model
∙When the unit is plugged in for the first time, the unit will power up automatically to the preset defaults. The preset temperature for the UPPER/LEFT temperature zone is 43ºF (6ºC) and for LOWER/RIGHT temperature zone is 54ºF (12ºC).
∙You can press the left side UP and DOWN keys to control the internal temperature of the UPPER/LEFT tem- perature zone and press the right side UP and DOWN keys to control the internal temperature of the LOWER/ RIGHT temperature zone.
∙The temperature that you desire to set will increase 1ºC or 1ºF if you press the UP key once and will decrease 1ºC or 1ºF if you press the DOWN key once. The display flashes while you make the setting.
∙After the temperature has been set, the display will flash four times before it shows the current internal temper- ature of the particular temperature zone.
∙To view the set temperature at any time, press the UP or DOWN key, the set temperature will temporarily flash in the display for 5 seconds. Then the display shows the current internal temperature again.
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption (power surge, breaker switch, etc.), the unit can remember the previous tem- perature settings. When the power has restored, the temperature display will show the current cabinet tempera- ture.
DOOR ALARM
If the door has been left open for more than 60 seconds, the alarm will sound. The alarm will stop by closing the door.
TEMPERATURE ALARM
An alarm will sound if the temperature in one of the zones rises or falls outside the temperature range
INTERIOR LIGHT
The interior light makes it easy to view your wine labels and enhances the display of your collection. Pressing the LIGHT key toggles between 2 modes of operation for the internal lights: Functional (default) mode and Showcase mode. If you are in functional (default) mode, the lights will turn on only when the door is open. If you are in Show- case mode, the lights will be on whether or not the door is open.
DYNAMIC CLIMATE / SILENT MODE
In the Dynamic Cooling mode, the interior fan cycles on and off to circulate the inside air evenly even the set tem- perature is reached. This will create a continuous climate inside the cabinet so you can store all your wine under exactly the same excellent conditions. In the Silent mode, the interior fan stops working when the set temperature is reached.
Dynamic Climate mode is the default preset mode which creates low noise. To change to Silent mode, press and hold the UP key for approximately five seconds. The wine refrigerator will beep three times to confirm silent mode is on. To change back to Dynamic Climate mode, press and hold the DOWN key for approximately five seconds.
The wine refrigerator will beep five times to confirm Dynamic Climate mode is on.
11