Whynter RPD-410W Care and Maintaince, Cleaning the air grille and main unit, Cleaning the bucket

CARE AND MAINTAINCE

ALWAYS turn off and unplug the dehumidifier before cleaning.

1.Cleaning the air grille and main unit

∙Use a damp cloth to wrap the main unit or use water and a mild detergent. Do not use bleach, chemicals or abrasives.

∙Do not splash water directly onto the unit. Doing so may cause an electrical shock, cause the insulation to deteriorate, or cause the unit to rust.

∙Use a vacuum attachment or brush to clean the air intake and outlet grilles.

2.Cleaning the bucket

Clean the bucket to prevent growth of mold, mildew and bacteria every two weeks.

∙Fill the bucket with clean warm water and add mild detergent to the water.

∙Dry thoroughly before reinserting the bucket to the main unit.

NOTE: Do not clean the bucket in a dishwasher.

3.Cleaning the air filter

To ensure the air intake is filtered properly and to assure that your dehumidifier runs efficiently, it is recommended to clean the air filter at least once every two weeks.

∙Remove the bucket and pull filter downwards. (Fig 10)

∙Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt.

∙Rinse the air filter under warm or cold running water (no hotter than 100F.)

∙Dry thoroughly before reinserting the air filter.

∙ Reinstall the air filter and replace bucket securely.	Fig 10
CAUTION:
NEVER operate the dehumidifier without an air filter in place.

4.End of Season Storage

∙After turning off the unit, wait 24 hours before emptying the bucket to allow excess moisture to drain into the bucket.

∙Clean the main unit, water bucket and air filter as detailed above.

∙Wrap the cord around the power cord bracket (Fig.12a) or wrap the cord and secure it with the power cord strap (Fig.12b).

∙Cover the unit with the original plastic bag that came with the unit or any appropriate dust cover.

∙Store the unit upright in a dry, well-ventilated place.

Fig. 12a	Fig. 12b
Model: RPD-651W	Model: RPD401W

12 P a g e