Wine Cooler Safety
Your safety and the safety of others are very important to us.
To reduce the risk of fire, electrical shocks, or injury when using your Wine Cooler, follow these basic precautions:
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that may result in serious injury. All safety messages will follow the Safety Alert Symbol and either the words” DANGER” or “WARNING”.
Danger means that failure to heed this safety statement may result in severe injury or death.
Warning means that failure to heed this safety statement may result in extensive product damage, serious injury, or death.
Caution means that failure to heed this safety statement may result in minor or moderate injury, or property or equipment damage.
All safety messages will alert you to know what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.
IMPORTANT SAFE GUIDES
Before the Wine Cooler is used, it must be properly positioned and installed as described in this manual, please read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the Wine Cooler, follow basic precaution, including the following:
∙Plug into a grounded
∙Do not use if the power supply cord is damaged. If damaged, it must be replaced by a qualified electrician.
∙It is recommended that a separate circuit, serving only your Wine Cooler be provided. Use receptacles that cannot be turned off by a switch or pull chain.
∙Never clean Wine Cooler parts with flammable fluids or harsh chemicals. These fumes can create a fire hazard or explosion.
∙Do not store or use gasoline or other flammable vapors and liquids in the vicinity of the Wine Cooler or any other Wine Cooler.
∙Before proceeding with cleaning and maintenance operations, make sure to unplug the Wine Cooler.
∙Do not connect or disconnect the electric plug with wet hands.
∙Do not attempt to repair or replace any part of your Wine Cooler unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.
Page 3
