IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electrical shock, or injury when using your Wine Cooler, follow these basic precautions:
Read all instructions before using your Wine Cooler
∙An empty cooler can be a hazardous for children or small pets. If disposing of the cooler, remove gasket seals, latches, lids or the entire door from your unused Wine Cooler, or take other action to ensure the cooler is harmless.
∙Never allow children to operate, play with, or crawl inside the Wine Cooler.
∙Never clean Wine Cooler parts with flammable fluids or harsh chemicals. The fumes can create a fire hazard or explosion.
∙Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other Wine Cooler. The fumes can create a fire hazard or explosion.
Before using your Wine Cooler
∙Remove the exterior and interior packing.
∙Before connecting the Wine Cooler to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
∙Clean the interior surface with lukewarm water using a soft cloth.
Installation Introduction
∙The Wine Cooler is designed to be for free standing installation.
∙WARNING: Do not store or install the Wine Cooler outdoors.
∙CAUTION: This Wine Cooler is designed for storing and cooling wines. Do not store perishable food, medicine or other medical products.
∙Place your Wine Cooler on a hard and level floor that is strong enough to support it when it is fully loaded.
∙To level your Wine Cooler, adjust the leveling legs at the bottom of the Wine Cooler if needed. We do not recommend installing the Wine Cooler on carpet.
∙For free standing installation, 6” of space from the back and 4” from both sides of the Wine Cooler are suggested. NOTE: DO NOT install the Wine Cooler near an oven or other heating source. Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. For best performance, do not install the Wine Cooler behind a cabinet door or block the vents.
∙Avoid locating the Wine Cooler in area that may be exposed to excessive moisture.
∙Plug in the Wine Cooler into an exclusive, grounded wall power outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a qualified electrician or an authorized service center.
Page 5
