Parts and Features
1 | Hinge Cover | 7 | Light Switch |
2 | Light | 8 | Magnetic Door Seal |
3 | Fan Mask | 9 | Glass |
4 | Shelf | 10 | Door Handle |
5 | Foot | 11 | Door Frame |
6Water Box
Note: Your specific model of Wine Cooler may differ slightly from the diagram above but its operation is essentially the same.
Installation
1.Remove all packaging.
2.Set up the Wine Cooler on a level surface. Make sure you have at least 4” clearance on each side and 6” clearance in the back for ventilation.
3.Clean the interior surface with warm water and a soft cloth.
4.Insert power cord into a power socket. Make sure the power socket is grounded 110v ~AC / 60 Hz socket.
5.Fill the Wine Cooler with your choice of wine bottles. Allow up to 24 hours of operation for the bottles to reach the desired temperature.
Page 6
