Getting Started LukWerks User Guide
15
Once the camera appears, you can change its configuration, set a name, or adjust the picture options.
(See the chapter on Setting System Options for information on these settings.)

b. You did set a custom password

If you HAVE set a custom camera password, you need to complete a few additional tasks. This is
necessary because new cameras are shipped with no password (different from the custom password
you have set). Therefore, Werks will not automatically identify it.
Follow these instructions to include the new camera into your Werks system:
1) Go to the Werks > Setup > Advanced dialog screen.
2) Click the Find My Cameras button.
3) Complete the Find My Cameras Wizard.
Note: We recommend that you set a custom password because a custom camera password provides you with
security from others having access to your streaming video.
Camera Focus and Aim
The factory default settings work great for most applications. However, if you find you need to adjust the
camera it only takes a few minutes. It is easiest to focus and adjust the camera from an outlet near your
computer. The Luk Cameras have two components that allow you to adjust the camera’s viewpoint and focus:
the camera eyeball and the lens.
On the back panel, you will notice an adjustable eyeball. Use this ball to change the angle of the camera lens.
To adjust the focus, gently twist the lens on the front of camera to the right or left. You may find it easiest to
take your camera back to your PC to do this work – saving you the trouble of walking back and forth.
Product Support
If you have any questions about the installation procedures, please check out the support section of our
website for the most recent information. If you still need help contact LukWerks Technical Support via email at
supp ort@ lukw erks .com , or by phone at 877- LUKWERKS [(877) 585-9375] (for customers within the
United States and Canada).
Tip of the Day
Werks displays a Tip of the Day dialog window, as
shown in the graphic below.
This dialog displays each time Werks is started.
By default, the "Show tips at startup" is checked. You
can un-check this so that the tips dialog window won't
display at startup.
To show the Tips of the Day dialog, right-click on the “?”
button in the upper-right corner of the Werks system
and click on Tips of the Day.
There are currently about 25 tips that you can cycle
through.