Regulatory and Safety LükWerks User Guide
92
ELECTRIC SHOCK HAZARD When properly installed and configured, the LukWerks equipment is designed to protect users from exposure
to hazardous voltage levels. This system should only be operated from the type of power source indicated in
this guide and on the system’s label. If you are not sure of the type of power supplied to your home or building,
consult your local power company. There are no user serviceable components within any of the equipment
enclosures. Users should not attempt to repair LukWerks equipment. Malfunctioning equipment should be
serviced using the guidelines found in this manual. If an enclosure does accidentally come open, remove the
power to the unit before handling it in any way.
Lightning also presents a real, but unlikely source of hazardous electric shock. As with all electrical equipment,
it is best to unplug the LukWerks components during an electrical storm. This is especially recommended for
Luk Cameras mounted on exterior windows. If the LukWerks equipment is installed in an area subject to
frequent electrical storms, equipment damage and user exposure to hazardous voltages can be minimized by
the proper installation of lightning rods and lightning arrestors. Please contact a licensed electrician for further
assistance.
Unplug the system from the wall outlet and refer servicing to a qualified service facility under the following
conditions:
•
When the AC plug is damaged
•
If liquid has been spilled into the system
•
If the system has been exposed to rain or water
•
If the system does not operate normally by following the operation instructions
•
If the system has been dropped or the enclosure has been damaged
•
If the system exhibits a distinct change in performance
•
If the system emits smoke or odors
•
If the system emits any audible sound
PROTECTION AGAINST PHYSICAL SHOCK Reasonable care should be taken to minimize the possibility of LukWerks components experiencing physical
shock. Because of its many mounting configurations, the Luk camera is particularly vulnerable to damage by
falling. Use the following guidelines to protect the Luk Camera:
•
Do not place the camera in an area where it will be exposed to solvents, caustic gasses, or strong air
currents.
•
Do not place the camera in an area where it can become dislodged by bumping, knocking, striking, or
other physical forces.
WINDOW MOUNT (SUCTION CUPS)
•
Place suction cup only on a flat, clean, dry window, or glazed surface.
•
Ensure the camera cable is routed in such a way as to preclude its accidental pulling the camera off
the window.
DESKTOP/SHELF MOUNT
•
Place the mount on a stable, flat, clean, dry surface, well away from any edge.
•
Ensure the camera cable is routed in such a way as to preclude accidental pulling the camera off the
desk or shelf where it is placed.