DUCT COVER INSTALLATION INSTRUCTION FOR WPN MODELS
PLEASE READ DUCT COVER AND HOOD INSTRUCTION
COMPLETELY BEFORE PROCEEDING WITH INSTALLATION
PARTS: One 15” Duct Cover Section
One 19” Duct Cover Section
One Duct Cover Bracket
Two #8 x
Four #8 x
Four #8 x 1/2“ Screw Mount duct cover to hood)
Your WPN model hood includes a duct cover, which can be used as an alternate installation method to enclose the ventilation duct. The hood can also be mounted under a cabinet.
HOOD UNDER CABINET | HOOD WITH DUCT COVER |
INSTALLATION | INSTALLATION |
Two typical installation options shown above
When used, the duct cover is designed to accommodate typical ceiling heights of
|
| CEILING |
CEILING | CEILING |
|
|
| |
|
| 19" MIN |
15" | 19" | 32" MAX |
| ||
|
| |
15" |
|
|
USING DUCT COVER | USING DUCT COVER | USING DUCT COVER |
SECTION - 1 ONLY | SECTION - 2 ONLY | SECTION - 1 & 2 ONLY |
CAUTION: To prevent damaging the duct cover, DO NOT remove the protective covering until you are ready to assemble the cover to the hood.