Front View
1.Control Panel with LED Display
2.Adjustable Dial: Thermostat and Timer
3.Adjustable Vertical/Horizontal Louvers
4.LED Display
5.Handle
6.Remote Control
Rear View
7.Air Outlet Hose
8.Evaporator Air Intake
9.Air Intake Hose
10.Hose Connectors
11.Water Drain and Plug
12.Power Cord
13. LCDI Plug | 7 |
10
11
1
2
3
5
4
6
8
9
13 or
12
10.TIME ON
To program the timer, press Timer On button until the
Main LED display shows a flashing ‘ | ’. |
11.TIME OFF
Press Timer Off button and the Main LED display will
show a flashing ‘ | ’. |
12. HR |
|
Press to set the desired hour setting.
13.MIN.
Press to set the desired minute setting.
NOTE: ALL SETTINGS CAN BE VIEWED ON THE REMOTE DISPLAY
SETTING THE UNIT TO TURN ON AND SHUT OFF AT A DESIRED TIME.
Press the TIME ON button once, to set the start time of the unit. Press the TIME ON button again to cancel this setting.
Press the TIME OFF button once, to set the end time of the unit. Press the TIME OFF button again to cancel this setting.
To set specific TIME ON
1.Press the TIME ON button once
2.Select the desired hour and minutes you want the unit to turn on again.
3. Once time is set do not press the TIME ON button.
To set specific TIME OFF
1.Press the TIME OFF button once
2.Select the desired hour and minutes you want the unit to turn off again.
3.Once time is set do not press the TIME OFF button.
Remote control real time clock instructions
Clock Time settings: HR and MIN
To set the hours, press HR button once, the time will add 1 hour, continue to press this button, the clock will add by 1 hour until extended to 11 hours, then will change to PM or AM and return to 0 (12:00).
To set the minutes, press MIN button once, the clock will add 1 minute, continue to press this button and the clock will add by 1 minute until extended to 59 minutes, then return to 00.
Clock set button | Reset button |
Back of remote
TO RESET ALL FUNCTIONS ON THE REMOTE CONTROL PRESS THE RESET BUTTON WITH A PENCIL OR PEN.
4 | 9 |