OPERATION USING ADJUSTABLE DIAL SWITCH
To adjust desired temperature and program the timer.
Select the desired temperature by turning Adjustable Dial Switch when using the unit in cooling or heating function.
The desired temperature range is from
31oC). The LED flashes to display the desired temperature during the setting, it displays the room temperature after 5 seconds, .
Press Timer On/Off button, turn adjustable dial switch to change the clock to the desired time for the unit being turned on or off.
Manual Horizontal | Automatic Oscillating |
Louvers | Louvers |
NOTE:
1.Do not abuse the remote control.
2.Do not place the remote control in a location that is exposed to direct sunlight or next to a heating unit or other heat source.
3.Do not use rechargeable batteries because they differ from standard dry cell batteries in shape, dimension and performance.
4.Be sure to replace the batteries with two new batteries of the same type.
Remote
Display
3
1 | 2 | 4 |
| ||
|
|
5
HorizontalVertical
NOTE: Your window kit has been designed to fit most standard vertical and horizontal window applications. However, it may be necessary for you to improvise/modify some aspects of the installation procedures for certain types of windows. Please refer to measurements below:
REMOTE CONTROL
PREPARATIONS &
1.Remove the cover from the back of the remote control.
2.Insert two AAA
3.Insert the power plug into an outlet.
4.Always point the remote control signal transmitter toward the unit when operating.
5.Make sure that the signal path is not obstructed.
6.The maximum distance at which signals can be received is 26.24 feet.
7.Remove the batteries if the unit is not going to be used for an extended period of time.
REMOTE CONTROL FUNCTIONS
1.ON/OFF-
Starts or Stops the Unit
2.WARMER
Adjust to desired warm temperature.
3.COOLER
Adjust to desired cool temperature.
4.MODE
Select the functions of the unit for: Fan Mode, Air Conditioning Mode, Heating Mode, Dehumidifying Mode and Auto Mode
5.TEMP./%
To display temperature or humidity on both Main LED and LED. Hold the button more than 3 seconds, to convert the temperature display from Fahrenheit (oF) to Celsius (oC) and vice versa. Press the button for less 3 seconds to view the humidity.
6.FAN
Select the fan speed desire: High, Medium and Low
The fan speed can be visually distinguished by the speed of the digital air segments progressing out from the wind mill fan image on the Main LED display.
7.SWING
To start swinging air louvers horizontally by press SWING
Button once. appears on the Main LED display. To stop, press SWING again. Vertical air flow direction can be adjusted manually.
8.SLEEP BUTTON
Press to select the function of the unit for Sleep Mode.
9.ION BUTTON
Press the Ion Button until ‘ ’ appears on the Main LED display, press again to stop.
A Side
6
WINDOW INSTALLATION 1. Exhaust Ports
4.Window Exhaust Adapter (2)
5.Adjustable Window Panel
6.Insulated sleeves
Window Kit: Extends from 28.375” (72cm) up to 55.625” (140cm)
NOTE: Air outlet hose should be mounted at A side
1)Select a suitable location, making sure you have easy access to an electrical outlet.
2)Remove the 2 hoses, 2 window exhaust adapters, 1 window panel kit.
3)Insert the end of the hose with the round connector into either the air inlet or air outlet hole on the back of the unit. Turn the hose clockwise to secure the hose into the hole. Do this for both hoses.
4)Screw the window exhaust adapters on both hoses by turning them clockwise.
5)Insert the air inlet window exhaust Adapter into the left hole of the window panel kit. Then insert the air outlet window exhaust Adapter in the right hole of the window panel kit.
NOTE: When operating the unit in HEAT MODE, stretch out the exhaust hose(s) to their full length, and wrap the insulated sleeves (6) around the hoses and secure with the velcro. Do this before installing the flexible hoses into the air inlet and outlet ports on the back of the unit.
NOTE: 2. While operating or installing, the hoses should not be blocked by curtains or any other obstructions.
8 | 5 |
