How to Use, Care and Cleaning | Windmere I-210 instruction

How to Use

This appliance is for household use only.

Getting Started

Remove any labels, stickers or tags attached to the body or soleplate of the iron.

Note: Use ordinary tap water for ironing. Do not use water processed through a water softening system.

Important: For optimum performance, let the iron stand for 90 seconds before beginning to iron.

TO FILL THE WATER TANK

2. Turn the fabric-select dial to the appropriate setting for your fabric (E). See fabric guide on the heel rest and read garment’s label to help you determine fabric type. The temperature-ready light glows until it reaches the appropriate temperature. It then cycles on and off during ironing.

	Note: For optimum performance, let the iron stand for
E	90 seconds before beginning to iron.

3.When finished ironing, turn the fabric-select dial to lowest heat setting, move the selector to and unplug the iron. Stand the iron on its heel rest and allow it to cool off.

1.Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark on the water tank (A). Do not overfill. Refill as needed.

2.Plug in the iron. Temperature-ready light glows when iron has reached set temperature setting.

Tip: If unsure of a garment’s fabric, test a small area (on an inside seam or hem) before ironing.

FOR STEAM IRONING

1. Move the dry/steam selector to the desired steam level (B).

Important: Always stand the iron on its heel rest when powered on but not in use.

EMPTYING WATER TANK AFTER IRONING

Note: It is not necessary to empty the water after each use.

1. Turn the fabric-select dial to . Unplug the iron.

Stand the iron on its heel rest and allow it to cool off.

2. Empty the water by holding the iron over a sink with the tip pointing down. Water will empty out of water-fill opening (F).

Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified service personnel.

2. Turn the fabric-select dial to appropriate setting (between 4 and 6) for your fabric (C). See fabric guide on the heel rest and read garment’s label to help you determine fabric type. The temperature-ready light glows until it reaches the appropriate temperature. It then cycles on and off during ironing.

C	3. When finished ironing, turn the fabric-select dial to lowest heat
	setting, move the selector to	and unplug the iron. Stand the

iron on its heel rest and allow it to cool off.

Important: Always stand the iron on its heel rest when powered on but not in use.

CLEANING OUTSIDE SURFACES

1.Make sure iron is unplugged and has cooled completely. Wipe the soleplate and outer surfaces with a soft cloth dampened with water. Never use abrasives, heavy-duty cleansers, vinegar or scouring pads that may scratch or discolor the iron.

2.After cleaning, steam iron over an old cloth to remove any residue from the steam vents.

STORING YOUR IRON

1. Check that the selector is set to

FOR DRY IRONING

1.Make sure dry/steam selector is set to (D).

Note: It is recommended that you empty the water (see “Emptying Water Tank After Ironing”).

2.	Unplug the iron. Stand the iron on its heel rest and allow it to cool off.
3.	Store vertically on its heel rest to prevent water leaking from the soleplate,
	or you can empty the water tank.

I-210 specifications

Windmere I-210 is an innovative residential community that embodies a blend of modern architecture, sustainability, and advanced technology. Located conveniently near major urban centers and surrounded by nature, Windmere I-210 serves as a perfect retreat for those seeking both tranquility and connectivity.

One of the primary features of Windmere I-210 is its eco-friendly design. The community is built using sustainable materials and techniques, ensuring minimal environmental impact. Solar panels are a common sight atop every home, allowing residents to harness renewable energy while significantly reducing their utility costs. The integration of energy-efficient appliances further enhances this commitment to sustainability, allowing families to live comfortably without burdening the planet.

Smart home technology is another hallmark of Windmere I-210. Each residence comes equipped with a comprehensive home automation system, enabling residents to control lighting, temperature, security, and even entertainment systems through their smartphones or voice-activated devices. This not only improves the everyday living experience but also enhances home security—allowing residents to monitor their properties remotely.

The landscaping around Windmere I-210 is designed to enhance the natural beauty of the environment while promoting biodiversity. Native plants and trees are strategically placed to provide shade, attract local wildlife, and create a serene atmosphere. Community parks and green spaces abound, encouraging outdoor activities and fostering a sense of community among residents.

The community is also designed with accessibility in mind. Wide sidewalks and bike paths ensure that individuals of all ages and abilities can navigate the area easily. Furthermore, Windmere I-210 is situated near public transportation routes, making commuting to nearby cities both convenient and eco-friendly.

Safety and security are prioritized in Windmere I-210. The community is equipped with state-of-the-art surveillance systems and has dedicated security personnel to ensure that residents feel safe and protected at all times.

In summary, Windmere I-210 is more than just a residential community; it is a lifestyle choice. By focusing on sustainability, cutting-edge technology, and community-oriented design, Windmere I-210 stands out as a model for modern living. It provides an idyllic setting for families seeking a harmonious blend of comfort, innovation, and environmental consciousness. As urban landscapes evolve, Windmere I-210 represents the future of residential development, prioritizing both quality of life and the health of the planet.

Windmere I-210 manual How to Use, Care and Cleaning

Models: I-210