Windmere WCM2025C How to Use, Before You Use Your Coffee Maker, Coffee Yield, Coffee Filters

Product may vary slightly from what is illustrated.



MAX

12

11

10

9

8

7

6

5

4

3







†1. Swing-out brew basket (Part# WCM2025C-01)

†2. Permanent nylon mesh filter (inside) (Part# WCM2025C-02)

3.Water window with level markings

4.Auto pause & pour

†5. 1.8 L (12-cup) capacity glass carafe (Part# WCM2025C-03)

6.Backlit ON/OFF (I/O) switch with power indicator

7.Ergonomic carafe handle

†Consumer replaceable/removable parts

3

How to Use

This product is for household use only.

Before You Use Your Coffee Maker

Before preparing coffee in your new Coffee Maker, thoroughly clean the Carafe, Carafe Lid and Permanent Filter Basket in hot, sudsy water. Rinse and dry. Replace disassembled parts. Clean the inside of the Coffee Maker by brewing two full Carafes of tap water (see Brewing Instructions below).

NOTE: At the end of first cycle, turn Coffee Maker off and wait ten minutes. Turn unit on and brew second Carafe of water.

Coffee Yield

12-Cup Coffee Maker: 12 (5 oz.) cups.

Note: A 5oz. cup is the American industry standard and is used by most Coffee Maker manufacturers. To fill your favorite mug, fill Coffee Maker reservoir with enough water for 2 cups (10 oz.).

Coffee Filters

Your coffee maker comes with a permanent filter. You may use a Cone-shape paper filter if desired. Cone-shaped paper filters are available locally at grocery stores and where Coffee Makers are sold. Standard #4 filters should be used.

The use of basket-style paper filters is not recommended, since they do not conform to the shape of the Filter Basket and may cause coffee to back up and spill over during brewing.

Brewing Instructions

1.Plug Coffee Maker into any 120 V AC electrical outlet.

2.Fill Carafe with cold tap water and pour into Water Chamber. Markings on the Water Window indicate level of water required to brew desired number of cups. No less than two cups is recommended.

Note: The amount of brewed coffee will always be less than the amount of water placed into Coffee Maker, since about 10% is absorbed by coffee grounds and paper filter.

3.Place the Permanent Filter in the Swing-Out Filter Holder. Measure one level tablespoon of drip or regular grind coffee for each cup of coffee desired. For stronger or milder coffee, adjust amount of coffee to suit your taste.

4.Return Swing-Out Filter Holder to the closed position.

5.Place Carafe on Warming Plate.

6.Switch Power Select Button to ON (I).

7.If you wish to serve a cup of coffee before brew cycle is completed, simply remove Carafe from Warming Plate. Dripping will automatically cease. Return Carafe to position on Warming Plate within 60 seconds; dripping will resume.

8.Upon completion of the brew cycle, wait about one minute until the brew dripping from the Filter Holder into the Carafe has stopped. Carafe Lid should be kept in place to facilitate safe serving and help keep coffee at proper serving temperature.

9.To keep coffee hot, return Carafe to the Warming Plate after serving. The Warming Plate will automatically cycle to maintain ideal serving temperature as long as the Coffee Maker is ON (I).

4