Windsor 10080480 operating instructions OPERATIONS-PRE RUN Setup

OPERATIONS-PRE RUN SETUP

STEP 5

STEP 6

Lower machine to floor.

Select continuous setting to start solution spray or select intermittent setting to enable use of trigger switches to start solution spray.

The intermittent setting requires the operator to hold any one of the three trigger switches in the “on” position with the fingers, and is typically used in small areas where short cleaning passes are made.

The continuous setting allows the operator to set the switch in the “on” position with one touch, and is typically used in large areas where long cleaning passes are made.

Place main switch in machine cleaning mode to start cleaning process.

3-8 86302100 CLIPPER DUO 10/02/07