OPERATIONS-OPERATING THE MACHINE
1.This machine can be operated in either direction. For smaller areas operate the machine by pulling rearward.
2.For larger unobstructed areas, flip the handle and use the machine’s brush assisted propelling motion.
Start at wall closest to power outlet. For small areas, pull straight back without pushing down on handle.
Release intermittent trigger switches or turn off continuous setting on solution switch approximately 1 foot before ending cleaning pass.
2 | 1 |
| STEP 1 |
STEP 2 |
1 ft. |
(30 cm) |
STEP 3 |
Push down on handle to raise vacuum shoe and | 1 in. |
|
(25mm) |
| |
brush before moving to the next cleaning pass. |
|
|
Overlap brush contact area approximately 1 inch. |
|
|
|
| STEP 4 |
86302100 CLIPPER DUO 10/02/07 | ||
