ALTERNATE CLEANING PATH |
Start at wall closest to power outlet. For large areas flip handle and operate machine in parallel passes, overlapping brush path. Clean perimeter last.
VACUUM INTAKE |
SOLUTION INTAKE |
STEP 5 |
| STEP 6 | |
CENTER | SHUT | |
OFF | DOWN | |
POSITION | ||
|
During operation, observe the following: This machine is equipped with clear dome to facilitate operator viewing of dirty solution and vacuum air flow.
During operation, observe the vacuum intake. Large amounts of water or foam entering the vacuum system can damage the vacuum motor. If you notice either condition, shut down the machine immediately. Empty recovery tank and/or add defoamer to recovery tank.
Use right side of machine for cleaning against walls.
After cleaning, turn off all controls, and carefully unplug machine.
86302100 CLIPPER DUO 10/02/07 |
