Windsor cdt7 10080220 manual Controls/Component Locations

1

6

2

3

5

4

8

7

CONTROLS/COMPONENT LOCATIONS

1.Main Handle. Used to pull and maneuver machine.

2.Electrical Cord.

3.Pump Switch. Turns on pump and enables spray.

4.Brush/Spray switch. Turns on brush motor and activates electro-valve to dispense solution to floor through jets. Intermittent, off, and continuous settings.

5.Vacuum Motor Switch. Turns on vacuum motor

6.Brush Motor Circuit Breaker. 6 amp. Breaker protecting brush motor.

7.Vacuum Motor Circuit Breaker. 15 amp. Breaker protecting vacuum motor.

8.Recovery Dump Hose. Facilitates draining dirty cleaning solution.

9.Solution Dump Hose. Facilitates draining excess cleaning solution from solution tank.

9

CADET 86038220 03/16/07 3-2