Windsor CSX26SP, CSX24 manual Machine Operation, 3-13, Starting Machine, Emergency Stop Procedures

MACHINE OPERATION

PRE-RUN MACHINE INSPECTION

Do a pre-run inspection to find possible problems that could cause poor performance or lost time from breakdown. Follow the same procedure each time to avoid missing steps.

NOTE: See maintenance section for pre-run machine inspection checklist items.

STARTING MACHINE

NOTE: Perform pre-run machine check before operating machine.

FOR SAFETY: Before starting machine, make sure that all safety devices are in place and operating properly.

1.The operator should be on the pedal platform. The throttle pedal must be in the neutral position.

2.Turn the machine power on by turning key switch clockwise to the “ON” position.

3.Check the position of the Directional Control Switch to make sure the machine will travel in the direction intended.

4.Press the Drive Reset Directional Control Switch to reset and set the intended direction for travel.

5.Press lightly on the throttle pedal with right foot.

EMERGENCY STOP PROCEDURES

1.Push in emergency stop button. This will also engage the parking brake and cause the machine to stop immediately.

3-13 86317500 CHARIOT SCRUBBER 11/15/08