SERVICE SCHEDULE
MAINTENANCE | DAILY |
Check machine for cord damage | * |
Check recovery dome and gasket for | * |
damage and cleanliness | |
Check hoses for wear, blockages, or | * |
damage | |
Check handles, switches, and knobs | * |
for damage | |
Check vac motor intake filter and clean | * |
Run one gallon of water through |
|
system | * |
Clean out recovery tank and check | * |
float valve to make sure it moves freely | |
Clean out solution tank and remove | * |
and clean vacuum intake screen | |
Clean outside of all tanks and check for | * |
damage | |
Run vac motor for at least one minute | * |
to allow motor to dry | |
Store with dome off tank to allow the | * |
tank to dry | |
Check all gaskets for wear and leakage |
|
Check vacuum intake screen for |
|
damage; replace if necessary |
|
Check pump pressure; observe spray |
|
pattern and check with gauge if |
|
necessary |
|
Check and clean solution screen |
|
Check cables for fraying |
|
Check overall performance of machine |
|
Check vac motor carbon brushes |
|
WEEKLY
*
*
*
*
*
*
MAINTENANCE
QUARTERLY
*
D100 86038260 05/21/07 |
