MACHINE TROUBLESHOOTING
PROBLEM | CAUSE | SOLUTION |
Machine will not run | Circuit breaker tripped in | Check and reset. |
| building. |
|
| Power switch failure | Test switch for continuity and |
|
| replace if necessary. |
| Tripped circuit breaker | Reset. |
| Faulty power cord | Replace. |
| Fuse in motor blown | Replace |
| (Dual speed only) | CAUTION: To reduce the risk |
|
| of electrical shock, unplug the |
|
| machine before opening fuse |
|
| holder. Fuse will only open |
|
| under extreme conditions. |
|
| Investigate cause before |
|
| replacing. |
Electrical shock | Equipment not grounded | Follow grounding instructions |
|
| exactly. |
| Receptacle not grounded | Have an electrician inspects |
|
| building’s wiring. |
| Internal wiring problem | Ensure that the machine wiring |
|
| matches the appropriate wiring |
|
| diagram. Replace any wires or |
|
| components that are short |
|
| circuiting. |
Repeated circuit breaker | Mechanical problem | Higher amp draws indicate a |
tripping |
| mechanical problem. Find the |
|
| problem before using the |
|
| machine. |
| Faulty circuit breaker | Test circuit for continuity. |
|
| Replace circuit breaker if |
|
| necessary. |
Excessive vibration | Pad not centered | |
| Damaged or unevenly worn | Replace pad. Do not rest |
| pad | machine on pad when not in |
|
| use. |
| Damaged pad driver | Replace. |
Pad does not turn but motor is | Sheer coupling has failed | Replace coupling. |
running |
|
|
86309580 FLOOR POLISHER 10/08/08 |
