Windsor TCZOE Maintenance, @Apply Grease Use Spray Lubricant, Thread Locker Red or blue

MAINTENANCE

Before Starting the Work Period

End of Work @

Period

Before Storing

Maintenance Item		Daily		Weekly		Monthly		Annually
Check Vac Hose Connections		*
Clean the Squeegee Blades		*
Inspect Brush or Pad		*
Inspect Vac Fan Foam Breaker	I	*	I		I		I		I
Inspect power cord for wear		*
Drain & Rinse Tanks		*
Raise SqueegeeAssembly	I	*	I		I		I		I
Remove the BrushPad		*
Check the BrushLPad for Damage and or wear		*
Clean SqueegeeBlades & Foam Breaker		*
Remove lint build-up from screen in the recovery tank well.		*
Remove tank lid and allow recoverv to drv between uses.		*
Check Solution Strainer	I		I	*	I		I		I
Check Casters & Wheels for proper lubrication	I		I	*	I	I			I
Inspect Tanks and Hoses				*				*
Inspect all Motors for Carbon
Motor Brush wear.

NOTE: 7. Details on these maintenance items can be found on the following pages.

2.This cable will lay on wet surfaces. Toprevent electrical shock immediatly replace cords with frayed or cracked insulation.

2.Periodically inspect the recovery tank and decontaminate if necessary, using a Hospital Grade Virucideor a 7-70 bleach to water solution. Wastewatershould be disposed of properly.

3.Occasionally check in line filter screen, rinse with hot water if necessary.

4.Frayed or cracked hoses should be replaced to avoid vacuum or solution pressure loss.

LUBRICATION:

The following symbols are found throughout the manual indicating the items requiring lubrication:

@Apply Grease

Use Spray Lubricant.

Thread Locker (Red or blue).

Use Anti-Seize when repairing.

EXAMPLE:

TCZOE 98447 7/1/97 7