SQUEEGEE ASSEMBLY
Before and during use of machine, use a damp cloth to wipe the outside and inside of squeegee to remove buildup of for- eignmaterial on the squeegeeblades. Thispreventsstreaking and residue on the floor.
Squeegee wear:
After extended use, the squeegee blades will wear. To im- prove squeegee performance and extend wear, proceed as follows:
1.Turn off all switches and place the machine on a level surface. Raise the squeegee to the transport position.
2.Loosen knobs on the left and right hand sides of squeegee until squeegee can be removed from the squeegee bracket.
3.Loosen the fasteners on front of squeegee to replace or adjust front blade.
4.Unlatch rear squeegee latch to replace rear blade.
Adjusting SqueegeeAssembly
ber
1.Lower the squeegee and move the machine forward.
2.Observe the level of the squeegee for an even curl along the length of the blade. Use camber adjustment knob to achieve even curl if required.
3.Adjust the down pressure nut located on squeegee
mounting assembly. Do not apply excessive force.
MAINTENANCE
SQUEEGEE DEFLECTION
INCORRECT
NOTENOUGH
TOO MUCH
TCPOE 98447 7/1/97
