1.4.3Attaching the Slide-Rail Assemblies to the Rack

Use this procedure to install the slide-rail assemblies to the rack.

1.Position a slide-rail assembly in your rack so that the brackets at each end of the slide-rail assembly are on the outside of the front and rear rack posts. See

FIGURE 1-4.

2.Attach the slide-rail assembly to the rack posts.

The method used to attach the slide-rails varies depending on the type of rack:

If your rack has threaded mounting holes in the rack posts, first determine whether the threads are metric or standard, and then insert the correct mounting screws through the slide-rail brackets and into the threaded holes.

If your rack does not have threaded mounting holes, insert the mounting screws through both the slide-rail brackets and rack posts, and then secure them with the caged nuts.

Rack post

Slide-rail assembly bracket on outside of rack post

Slide-rail assembly

FIGURE 1-4Slide-Rail Assembly Mounting to Rack Post

3. Repeat Step 1 and Step 2 for the remaining slide-rail assembly.

Chapter 1 System Setup 1-7

Page 17
Image 17
Sun Microsystems X2100 Attaching the Slide-Rail Assemblies to the Rack, Repeat and for the remaining slide-rail assembly