Sun Microsystems X2100 Disassembling the Slide-Rails Before Installation, Unpack the slide-rails

1.4.1Disassembling the Slide-Rails Before Installation

Use this procedure to remove the mounting brackets from the slide-rail assemblies.

1.Unpack the slide-rails.

2.Locate the slide-rail lock at the front of one of the slide-rail assemblies, as shown in FIGURE 1-2.

3.Squeeze and hold the tabs at the top and bottom of the lock while you pull the mounting bracket out of the slide-rail assembly, until it reaches the stop. See

FIGURE 1-2.

4.Pull the mounting bracket release button toward the front of the mounting bracket, as shown in FIGURE 1-2, and simultaneously withdraw the mounting bracket from the slide-rail assembly.

5.Repeat for the remaining slide-rail assembly.

Slide-rail lock	Mounting bracket
	release button

FIGURE 1-2Disassembling the Slide-Rail Before Installation

Chapter 1 System Setup 1-5