Sun Microsystems X2100 manual Install the Drivers on a Target Windows System

3.Type the appropriate command to install the drivers:

■For a Red Hat Linux system:

#/net/hostname/drivers/linux/red_hat/install.sh

■For a SUSE system:

#/net/hostname/drivers/linux/suse/install.sh

If the drivers do not install properly, you have two other alternatives:

■Install the drivers using a CD-ROM connected to the USB port.

■If you are running a Red Hat Linux operating system, the drivers included with the OS might work. Sun does not support open source drivers.

Install the Drivers on a Target Windows System

Note – Read the instructions in Section FIGURE 2-1, “Installation Flow Diagram” on page 2-3before following this procedure. You might need to install additional drivers on your system before installing the chipset and display drivers.

If you plan to only install the Windows chipset and display drivers, follow this procedure.

1.Browse to \\hostname\drivers\windows to get the drivers.

2.Install the drivers through the Device Manager.

2-12Sun Fire X2100 Server Getting Started Guide • April 2006