Sun Microsystems X2100 Attaching and Routing Cables, Install cables to your server, as required

8.Position the cable hangers snap them into place. (See

in the appropriate mounting holes in the CMA and FIGURE 1-13.)

For best results, place three hangers, evenly spaced, on the rear-facing side of the CMA, and three on the side facing the server.

CMA arm

CMA cable hanger

FIGURE 1-13Installing CMA Cable Hangers

1.4.6Attaching and Routing Cables

Use this procedure to attach cables to your server and route them through the CMA.

1.Install cables to your server, as required.

Refer to Section 1.5, “Cabling the Server” on page 1-17for an illustration of the server back panel ports and a procedure for installing cables to your server.

2.Route the cables through the CMA cable hangers.

1-16Sun Fire X2100 Server Getting Started Guide • April 2006