Sun Microsystems X2100 manual risetup.exe

A.1 Creating a RIS Image of Windows 2003 Server 32-bit and Platform Drivers

This section tells you how to create a Windows 2003 Server 32-bit image on a RIS server and then add platform specific drivers to the image. The following sections apply to both the Standard and Enterprise editions. All drivers for this procedure are located on the Supplemental CD, version 1.3 or later.

Note – Before using this procedure, you must install the RIS onto a Windows 2003 server. See the following URL for complete instructions on how to install the RIS.

http://support.microsoft.com/default.aspx?scid=kb;en-us;325862

A.1.1 Creating the Windows 2003 Server 32-bit Image on the RIS Server

To copy Windows 2003 Server onto the RIS server, do the following steps. Click Next or Finished in each screen to advance to the next screen.

1.Insert the Windows 2003 Server 32-bit CD into the RIS server's CDROM drive.

2.In the Start menu, select Run.

3.To start the RIS setup program, type the following command:

c:\ risetup.exe

Note – In all commands, c:\ is shown as the DOS command prompt.

4.In the “Welcome to the Remote Installation Services Setup Wizard“ screen, click Next.

5.In the “Remote Installation Services Options“ screen, choose “Add a new OS image to this remote installation server“.

6.In the Installation Source Files Location screen, choose the CDROM drive with the Windows 2003 Server 32-bit CD.

A-2Sun Ultra 20 Workstation Getting Started Guide • April 2006