Note – Keyboard, mouse and video are optional with an operating system that supports headless operation.
4.Connect a terminal to the serial port.
Note – The preinstall image is directed by default to the serial port (ttya) and nothing will show up on the monitor until the installation is completed an the system is reconfigured to allow video to the video port. See Section 1.8, “Using Serial Console Redirection” on page
5.Connect Ethernet cables to the server’s gigabit Ethernet connectors.
See Section 1.5.1, “Interconnecting Servers” on page
6.Connect any additional external devices to the server’s other connectors. FIGURE
1 | 2 3 4 | 5 | 6 | 7 | 8 |
SERIAL |
9
FIGURE 1-14 Back Panel
TABLE | Back Panel |
|
|
|
|
|
|
Label | Connector/Slot | Label | Connector/Slot |
|
|
|
|
1 | Power connector | 6 | Onboard HD15 video connector |
2 | Locate LED | 7 | Ethernet connectors (2) |
3 | Service indicator LED | 8 | PCI EXPRESS x16 graphics slot |
4 | Power LED | 9 | USB connectors (4) |
5 | Serial connector |
|
|
|
|
|
|