Tools Needed/Specifications

Tools needed for installation

Tape measure

Cutter

Phillips screwdriver

Electric or cordless drill

1/8" drill bit (for pilot holes)

7/16" wrench

5/16" socket/nut driver

1-1/2" to 3" hole saw (cable entry hole)

Sealant compatible with roof material (check with your vehicle manufacturer for compatibility)

Operating Voltage Nominal 12VDC - Operating range 9.5 VDC to 15.5 VDC

Current draw of electronics when Power Light is off — Nominal 500uA, 1.5mA Max.

Current draw of electronics when Power Light is on — Nominal 46mA, 70mA Max.

Current draw of electronics when Power Light is on and motor running — 3 amp Max.

Control Panel Size: 4.5 x 4.5 x

Control Panel Weight: .5 lbs.

Warning Device – .2 amps (not included)

Mount Specifications:	General Specifications:
Height Lowered: 5-1/2"	Operating Temperature: -10 to +130F
Height Raised: 33-1/2"	Humidity 90% noncondensing
Roof Space Required: 13.5 x 66" (Stowed position)	Shipping Weight OEM Models: 18.25 lbs.
Turning Diameter: 52"	Carton Size: 48" x 12" x 10-3/4"
Weight of Mount: 11.25 lbs.

Rev. 8/06