ASSEMBLY
STEP 1. Attach feed support to the backup support. See Figures 1 & 2. Make sure spring is locked into place.
Feed Support | Spring |
Feed Support
After inserting pin, swing long part of spring up into the feed support and snap into place under cable clip.
Coax Downlead from LNBF
Pin
Spring
Backup Support
Pin
FIGURE 1
STEP 2. Remove the two top bolts from the backup support and attach the elevation assembly to antenna. See Figure 3. Tighten bolts securely.
FIGURE 3
Backup Support
FIGURE 2
Slide elevation 
assembly into place
Elevation Assembly
Backup Support
2
