Installing Connector on Coax Cable

Parts

Tools Needed:

Cable stripper

Compression tool for compression connectors

Hex crimp tool for hex crimp connectors

Strip outer cover back 12 mm from end of cable.

TIP If installing in hot weather, increase these dimensions 3 mm.

Fray braid back as far	Trim braid close to	Slide connector tip
as outer cover will	outer cover, and	between braid and
allow.	remove 6 mm of	inner insulation
	inner insulation, being	(braid and foil, on foil
	careful not to nick	shield cable). Push
	the center conductor.	connector on cable
	Make sure no foil	as far as it will go.
	or braid can touch	Attach cable with
	center conductor.	proper crimping or
		compression tool. Do
		not crush cable out-
		of-round.

ORDERING REPAIR PARTS

Repair parts are available at many RV dealers and/or service centers throughout the country. If you don't have a dealer/service center near you, call Winegard Company at 1-800-288-8094. All major credit cards accepted. Parts are available only in the packages shown on the following pages. Order by the model number of the package needed. Example: To order the elevating gear, order RP-3000. Tax, shipping and handling additional.

Mount

Plug

Worm Gear