KitchenAid DHT-486XP manual Installation Steps, Parts supplied for installation

Models: DHT-486XP

1 34
Download 34 pages 32.88 Kb
Page 9
Image 9

Installation

steps

Parts supplied for installation:

base grille

miscellaneous parts bag

Check that all parts were included.

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

Do Not lower the refrigerator against the shipping base when removing the shipping base.

Do Not remove protective film until refrigerator is in operating position.

All four leveling legs must contact the floor to support and stabilize the full weight of the refrigerator.

Keep cardboard shipping piece or plywood under refrigerator until it is installed in operating position.

1.Remove and save literature package and parts bag taped to refrigerator door. Remove four brackets (two on each side) that attach shipping base to refrigerator bottom.

Do not remove tape and door bracing until refrigerator is in final position.

corner posts over side trim

corner

post over

handle

2.Place appliance dolly under the freezer side of refrigerator and loosely wrap dolly strap around refrigerator. Insert carton corner posts between strap and side trim and handles. Carefully tighten strap, making sure side trim and handles are protected.

3.Place pieces of shipping carton on the floor when rolling dolly and refrigerator into the house. Move refrigerator close to built-in opening.

grounded

4.Set power

outlet

 

switch at top of

retainer

cabinet to OFF

 

position.

 

Plug power supply cord

into grounded outlet.

Install retainer on

power

grounded outlet

supply

using screw from

cord

parts bag.

5.Place top of cardboard

carton or plywood under refrigerator. Remove dolly. Open appliance doors and remove all boxes, parts packages and packing materials from refrigerator and freezer compartments. Do Not remove protective film.

To prevent floor damage make sure levelers are raised (not touching the floor) and refrigerator is on rollers before moving.

Move the refrigerator straight back and evenly into the opening. Check that:

copper tubing is not kinked.

power supply cord is on top of refrigerator next to cover.

lower right hand

front corner of

refrigerator

copper

water line to

valve

Check that water supply line has been flushed. See Page 7.

6.Pull water supply line out from underneath refrigerator. Carefully make a 3-1/2" or less (180°) hook-shaped end in the water supply line. Do not kink water supply line.

 

ferrule

1/4" (6 mm)

 

compression

copper line

nut

to valve

Remove cap from water valve. Slide compression nut, then ferrule, onto water supply line. Insert water supply line completely into water valve. Tighten compression nut to water valve. Do not overtighten.

screws

Note: Connecting the water supply line to the water valve is easier if the water valve is removed from the mounting bracket. Remove the two screws attaching the water valve and pull forward. Connect the water supply line. Reattach water valve to mounting bracket.

Turn water supply line valve to “Open” position. Turn refrigerator switch to “On” position. Wait a few minutes. Check water line connections for leaks.

Page 9

Page 9
Image 9
KitchenAid DHT-486XP manual Installation Steps, Parts supplied for installation

DHT-486XP specifications

The KitchenAid DHT-486XP is a high-performance dishwasher designed to meet the needs of modern kitchens. Boasting a sleek and stylish design, it seamlessly integrates into any kitchen decor while providing powerful cleaning capabilities. Equipped with a variety of innovative features, this dishwasher simplifies the task of washing dishes, making it an essential appliance for busy households.

One of the standout features of the DHT-486XP is its advanced cleaning performance. With a robust system that includes multiple wash cycles and options, users can choose the perfect setting for their specific load. The dishwasher offers specialized cycles for heavily soiled pots and pans, delicate glassware, and even energy-saving modes for everyday use. This versatility ensures that every item comes out sparkling clean, regardless of the level of soil.

Furthermore, the DHT-486XP incorporates a unique ProWash sensor technology that automatically detects the soil level of the dishes and adjusts wash times and water usage accordingly. This intelligent feature optimizes the washing process and enhances efficiency, providing exceptional cleaning results while conserving water and energy.

Another remarkable aspect of the KitchenAid DHT-486XP is its quiet operation. With the noise-reduction technology, this dishwasher operates at remarkably low decibel levels, making it ideal for open-concept living spaces. Users can run their dishwasher at any time of day without the worry of disturbing family members or guests.

The interior design of the DHT-486XP is thoughtfully arranged to maximize space and organization. It features adjustable racks, a third rack for utensils, and fold-down tines that accommodate larger pots and pans. This design allows users to customize the loading space according to their needs, ensuring that no dish goes unwashed.

Additionally, the DHT-486XP is designed with convenience in mind. The easy-to-use control panel features a LCD display, making it simple to navigate through wash cycles and options. The dishwasher also includes a delay-start feature, which allows users to set their preferred washing time, adding to the appliance's overall flexibility.

In summary, the KitchenAid DHT-486XP is a top-tier dishwasher characterized by its advanced technology, effective cleaning performance, quiet operation, and user-friendly design. For anyone seeking a reliable and efficient dishwasher to enhance their kitchen experience, the DHT-486XP stands out as an exemplary choice.