Built-in opening requirements & dimensions

All dimensions ±1/8" (3 mm)

A solid soffit or two, 2" x 4" x 32"

(5 cm x 10 cm x 81 cm) wood boards to cover the width of the compressor cover are required above the refrigerator to prevent tipping during use.

If solid soffit is more than 1 inch

(2.5 cm) above refrigerator, two 2"x 4" x 32" (5 cm x 10 cm x 81 cm) wood boards must be installed on the wall 1/4 inch (6 mm) above the refrigerator cover. The bottom surface of the boards should be

84 inches (213 cm) from floor. Boards must be long enough to fully cover width of compressor cover.

The built-in refrigerator can be installed:

recessed in the cabinet opening.

at the end of cabinets using a side panel to enclose the refrigerator side.

Select one method and use dimensions given. Dimensions shown provide 0" (0 cm) clearance.

Mark stud

locations on

rear wall 80" - 90"

(203-229 cm)

above floor.7" (18 cm)

Grounded electrical

outlet location

Grounded electrical outlet is required.

Height

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Install side panel (optional)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

support board on rear wall

 

77"

 

 

 

 

 

 

if opening depth is

 

 

 

 

 

 

(196 cm)

 

 

 

 

25" (63.5 cm) or more.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Width

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Water line

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Water line must

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

provide 15-100 psi

location can be

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

through floor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(103-690 kPa) water

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or wall.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pressure. Rough in

 

 

7"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

water line before

 

 

 

 

 

 

 

 

 

 

 

 

 

(18 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

installing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

refrigerator.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5-1/2"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(14 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(7.6 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2" (5 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Depth

 

 

 

 

10"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(25 cm)

 

 

 

 

 

 

 

6"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(20 cm)

 

 

 

 

 

(15 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Floor: Must support refrigerator, contents, and door panels.

1/2" (12 mm) hole for

plumbing can be located anywhere within shaded area.

Opening dimensions

 

 

 

 

 

 

 

 

 

Model

36" (91 cm)

42" (106 cm)

48" (122 cm)

 

Width min.

35-1/2" (90 cm)

41-1/2" (105 cm)

47-1/2" (120 cm)

 

Height min.

83-1/4" (211.5 cm)

83-1/4" (211.5 cm)

83-1/4" (211.5 cm)

 

 

 

 

 

 

 

 

 

Height max.

84-3/4"

(215 cm)

84-3/4"

(215 cm)

84-3/4"

(215 cm)

 

Depth min.

23-1/2"

(60 cm)

23-1/2"

(60 cm)

23-1/2"

(60 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 3

Page 3
Image 3
KitchenAid DHT-486XP manual Built-in opening requirements & dimensions, Opening dimensions

DHT-486XP specifications

The KitchenAid DHT-486XP is a high-performance dishwasher designed to meet the needs of modern kitchens. Boasting a sleek and stylish design, it seamlessly integrates into any kitchen decor while providing powerful cleaning capabilities. Equipped with a variety of innovative features, this dishwasher simplifies the task of washing dishes, making it an essential appliance for busy households.

One of the standout features of the DHT-486XP is its advanced cleaning performance. With a robust system that includes multiple wash cycles and options, users can choose the perfect setting for their specific load. The dishwasher offers specialized cycles for heavily soiled pots and pans, delicate glassware, and even energy-saving modes for everyday use. This versatility ensures that every item comes out sparkling clean, regardless of the level of soil.

Furthermore, the DHT-486XP incorporates a unique ProWash sensor technology that automatically detects the soil level of the dishes and adjusts wash times and water usage accordingly. This intelligent feature optimizes the washing process and enhances efficiency, providing exceptional cleaning results while conserving water and energy.

Another remarkable aspect of the KitchenAid DHT-486XP is its quiet operation. With the noise-reduction technology, this dishwasher operates at remarkably low decibel levels, making it ideal for open-concept living spaces. Users can run their dishwasher at any time of day without the worry of disturbing family members or guests.

The interior design of the DHT-486XP is thoughtfully arranged to maximize space and organization. It features adjustable racks, a third rack for utensils, and fold-down tines that accommodate larger pots and pans. This design allows users to customize the loading space according to their needs, ensuring that no dish goes unwashed.

Additionally, the DHT-486XP is designed with convenience in mind. The easy-to-use control panel features a LCD display, making it simple to navigate through wash cycles and options. The dishwasher also includes a delay-start feature, which allows users to set their preferred washing time, adding to the appliance's overall flexibility.

In summary, the KitchenAid DHT-486XP is a top-tier dishwasher characterized by its advanced technology, effective cleaning performance, quiet operation, and user-friendly design. For anyone seeking a reliable and efficient dishwasher to enhance their kitchen experience, the DHT-486XP stands out as an exemplary choice.