Winegard MV-4000 manual Installation, Installing unit on roof of vehicle

Models: MV-4000

1 12
Download 12 pages 622 b
Page 8
Image 8

Installation

Installing unit on roof of vehicle —

Install in DRY conditions only!

!

 

IMPORTANT! Do not install this system

in the rain, or under any wet conditions. Mois-

ture may affect electronics and void your warranty!

1.For best performance and to reduce signal ac- quisition time, park vehicle on a level surface; level the RV.

2.Select a level spot on your roof for installation.

6.Place the unit on the roof in its permanent location and mark around the base bracket, Figure 4. (Make sure the rear adjustable base foot is parallel with the center line of the vehicle. Refer to page 3, Fig- ure 1A ).

FIGURE 4

Using the chart, determine the minimum distances

to other equipment.

FIGURE 3

Obstruction Ht.

Unit Clearance

8”

4”

10”

11.5”

12”

19”

15”

32”

 

 

UNIT BASE

WARNING: Level the base front to back and side to side. If base is not level the MV-4000 may re- quire more time to locate the correct satellite or may not locate the correct satellite.

Be sure no roof-mounted equipment is blocking the satellite “line of sight”, Fig. 3

You will need to decide where the wires will enter the vehicle. A coax and a power wire (minimum 16 gauge) will need to be run into the vehicle.

WARNING: Many +12VDC sources can cause the unit to fail. Select a filtered source, preferably a dedi- cated line to the battery.

3.Remove dome. Place dome in safe spot to avoid damage. Place base on vehicle roof in the location selected.

4.Attach each mounting foot to base by securing with two 7/16” nylocks. See page 7 for foot locations.

5.After selecting location for unit (see number 2), put the unit on the centerline of the vehicle.

REAR MOUNTING FOOT MUST BE PARALLEL WITH THE CENTER LINE OF VEHICLE. See pg. 7.

7.Clean roof area where the base feet will be attached to the roof. Do not erase your marks!

8.Put approved sealant in the areas marked for the base feet. Place base feet on top of the sealant and screw down with the (4) #10 screws (provided) for each foot.

9.After all base feet are secured to roof, put sealant around edge of feet and over screws. Replace base on screws and reinstall nut.

FIGURE 5

BASE EXTERIOR

8

Page 8
Image 8
Winegard MV-4000 manual Installation, Installing unit on roof of vehicle

MV-4000 specifications

The Winegard MV-4000 is a modern outdoor TV antenna designed for optimal performance and reliability. As cord-cutting trends continue to rise, the demand for robust antennas that offer excellent reception has increased, and the MV-4000 stands out with its advanced features and technologies.

One of the key characteristics of the Winegard MV-4000 is its high gain of up to 60 miles, allowing users to receive over-the-air broadcast signals from a significant distance. This capability makes it an ideal choice for both urban and suburban environments, where signal reception can vary based on geographic location and obstructions.

The MV-4000 employs a combination of digital and analog technology to deliver superior picture quality. It includes a built-in low-noise amplifier (LNA) that enhances weak signals, reducing the chances of pixelation or signal drop-out. This amplifier is especially beneficial in areas with challenging terrain or far from transmission towers.

Constructed with durability in mind, the Winegard MV-4000 features a rugged design capable of withstanding harsh weather conditions. Its robust housing is resistant to corrosion and features UV protection, ensuring that the antenna maintains its integrity over time. This longevity is a significant advantage for users looking for a long-term solution for their television viewing needs.

The MV-4000 is also versatile in installation, allowing for both roof and wall mounting. This flexibility ensures that users can find the optimal location to capture signals without too much hassle. The antenna also includes a 360-degree rotation capability, which helps in adjusting the directional reception as needed, further enhancing its performance.

Another noteworthy feature of the MV-4000 is its compatibility with a range of devices. It can be easily connected to various TVs, DVRs, and streaming devices. This adaptability makes it an attractive option for consumers who want to enhance their viewing experience without investing in expensive cable packages.

In summary, the Winegard MV-4000 is a feature-rich outdoor antenna that combines high gain reception, advanced technology, and durability. With its focus on providing an excellent over-the-air viewing experience, it caters to a wide range of users looking to ditch cable while still enjoying quality television content. Whether you live closer to urban centers or in more remote locations, the MV-4000 is equipped to meet your digital broadcasting needs effectively.