Winegard RD-4610 owner manual Antenna Shown Partially Raised For Ease of Illustration only

STEP 3. Attach reflector to backup assembly as shown in Figure 2.

STEP 4. Attach RS-1000 antenna to elevating tubes, see Figure 2, using the two Eclips and pins provided. Attach coax cable to F-jack on antenna, slide weather boot over boot collar.

RS-1000 Antenna

Reflector

(4)5/16-18 x 5/8" Flat Head Bolt

(4) 5/16-18 Hex Nut

Backup Assembly

(4) 5/16" Flat Washer

NOTE: Make sure that coax cables fits between the reflector and the fixed feed arm.

ANTENNA SHOWN PARTIALLY RAISED

FOR EASE OF ILLUSTRATION ONLY

FIGURE 2

Attach coax cable to F-jack on antenna, slide weather boot over boot collar.

Attach RS-1000 to elevating tubes using E-clips and pins supplied.

Rev. 2/98

3