Winegard rm-4610 owner manual Approximately From Travel Position, Directional Handle, Point to

CAUTION: After INITIAL	FIGURE 15
INSTALLATION, the
antenna should ROTATE
APPROXIMATELY 360°
FROM TRAVEL POSITION.
The pointer on the
DIRECTIONAL HANDLE
should point towards the
RED SCREW on the
ROTATION CLAMP when
in TRAVEL POSITION.

ASSEMBLED VIEW

POINTER		Rotation
		Clamp
MUST POINT
		Red Screw
TO RED
SCREW ON
ROTATION
CLAMP		Flat Washer
WHEN IN
TRAVEL	POINT TO
POSITION	BACK OF RV	Nut for
		threaded tube

CAUTION:

The antenna MUST BE IN THE

TRAVEL POSITION before

ALIGNING the Directional

Handle and Ceiling Plate.

Tighten screw snugly

Elevating Shaft

Threaded Tube

3 Directional Handle Extension

1 Ceiling Plate

2(4) #10 Phillips Flat Head Screws

4Directional Handle

ALIGN POINTER

WITH ANTENNA

TRAVEL POSITION

5ELEVATING CRANK HANDLE (When installed, extends 2-1/4" from ceiling). Snap Handle into base when not in use.

10