Model RP-SK73 Shaw Direct Replacement LNB

1.Remove and set aside the four nuts and bolts holding the LNB guard to the feed arm. Then, remove the LNB guard from the feed arm.

2.Remove and set aside the screw holding the LNB to the feed arm.

3.Disconnect the four coax cables from the LNB using a 7/16” wrench, and carefully remove the LNB from the feed arm.

4.Connect the four cables running through the feed arm to the four ports on the replacement LNB. The cables can be connected in any order. Tighten each cable until fingertight, and then use a 7/16” wrench to tighten a quarter turn more.

Four coax cables connected to LNB

Screw holding

LNB to feed arm

Bolts holding LNB guard to feed arm

5.Slide the LNB into the feed arm, and re-install the screw (removed earlier) through the underside of the feed arm and replacement LNB. Tighten.

6.Slide the LNB guard onto the feed arm and over the LNB. The front of the LNB guard should be ~½″ in front of the LNB.

7.Install the four bolts through the four holes in the LNB guard. Thread a nut onto each bolt, and tighten.

Stowing the Antenna

1.Plug in the interface box.

2.Press and hold “POWER” for two seconds to turn on the interface box. Then, press the Power button again to stow the antenna.

Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000 1-800/788-4417 • FAX 319/754-0787 • www.winegard.com

Printed in U.S.A. • ©2012 Winegard Company Rev1 4/13 2452261

Winegard and TRAV’LER are registered trademarks of Winegard Company.

DIRECTV is a registered trademark of DIRECTV, LLC. DISH is a registered trademark of DISH Network L.L.C.

Shaw Direct is a trademark of Shaw Satellite G.P.

Disclaimer: Although every effort has been made to ensure that the information in this manual is correct and complete, no company shall be held liable for any errors or omissions in this manual. Information provided in this manual was accurate at time of printing.

Page 2
Page 3
Image 3
Winegard RP-SK05, RP-SK01, RP-SK09 manual Model RP-SK73 Shaw Direct Replacement LNB, Stowing the Antenna
Page 2

RP-SK73, RP-SK09, RP-SK05, RP-SK01 specifications

The Winegard RP-SK73, RP-SK05, RP-SK09, and RP-SK01 are part of a series of advanced satellite antennas designed for various applications, particularly in the realm of mobile and portable satellite communication. These models are tailored to meet diverse user needs, from casual satellite TV viewers to serious mobile technical users, emphasizing robust performance, efficiency, and user-friendly features.

The RP-SK73 integrates cutting-edge technology, boasting a sleek design and a powerful satellite tracking capability. It is particularly well-suited for RV users and those who frequently travel. One of its main features is the self-aligning satellite technology that allows users to quickly find and lock onto satellite signals with minimal input, facilitating a streamlined satellite viewing experience. This model supports high-definition programming and features a durable construction that withstands the elements.

The RP-SK05 is designed with ease of use in mind. It features a compact form factor that appeals to those with limited space, while not compromising on performance. This model includes enhanced signal acquisition technology, ensuring optimal reception even in challenging environments. Users appreciate the simplified setup process, which can often be achieved in just a matter of minutes. The RP-SK05 proves to be a reliable choice for tailgating, camping, and other outdoor activities.

Moving on to the RP-SK09, this model goes a step further in versatility, accommodating a wider range of satellite bands. It seamlessly integrates with multiple devices, allowing users to enjoy their favorite programming across different platforms. The RP-SK09 is also equipped with advanced noise reduction technology, which minimizes interference from other electronic devices, ensuring crystal-clear audio and video quality.

Lastly, the RP-SK01 is a robust entry-level model that provides excellent value without compromising on key functionalities. Its user-friendly interface and portable design make it a perfect solution for newcomers to satellite communications. The RP-SK01 is engineered to provide reliable connectivity, making it a solid choice for sporadic users or those testing the waters of satellite subscriptions.

In summary, the Winegard RP-SK series encapsulates a range of options catering to various satellite communication needs. Each model incorporates innovative technologies that enhance usability, signal quality, and setup efficiency, making them ideal choices for both casual users and dedicated enthusiasts alike.
Top Page Image Contents