Wizcom 2 Getting Started

Getting Started
3
Getting Started
Familiarizing Yourself with the Pen
The Pen Parts
Your Pen contains the following parts:
Important: Before using the headphones, please adjust the
volume using the
Voice Settings option in the Preferences
menu.
Setting Up Your Pen
To get started:
1. Remove your Pen from its protective case.
2. Remove the battery compartment cover from the back of
the Pen.
3. Insert 2 AAA batteries into the Pen with the positive and
negative terminals corresponding to the markings on the
sides of the battery compartment.
4. Close the battery compartment.
5. Remove the protective cover from the Pen tip.
6. Press to turn the Pen on.
7. The Pen is ready to scan!
Note: If you are left-handed, see Right-/Left-Handed on page
55 to change your Pen to left-handed scanning.