SHORTENING LIFE

Shortening life may be extended by following these guidelines:

•Do not salt foods over the fryer.

•Use good quality shortening.

•Filter shortening at least daily.

•Replace shortening if it becomes poorly flavored.

•Keep equipment and surroundings clean.

•Set thermostats correctly.

•Remove excess moisture and particles from food products before placing in fryer.

Add approximately 15% new oil daily. Keep level of shortening between the MIN and MAX level on the fryer tank back wall. Add fresh shortening as needed.

DAILY FILTERING

Turn gas valve OFF when draining or filling.

The shortening should always be filtered while liquefied. A cold fryer will not drain properly because the shortening under the cold zone tube area will remain hard, even if the heat is on for a few minutes. If necessary, the clean-out rod may be used to carefully stir up hard fat to an area above the cold zone where it will melt. After the cold zone is liquefied, turn the fryer thermostat and gas valve OFF.

Shortening life will be extended by filtering at least once a day or more often if conditions warrant. A commercial power filter (available from other manufacturers) may be used. Follow the manufacturer's operating instructions for draining, straining, and replacing shortening in the fry tank.

Another way to filter is to drain the shortening from the drain pipe through a filter bag, or cover the receiving container with cheesecloth or other filtering material.

Filtering Procedure

1.Turn the fryer OFF.

2.Slowly remove the baskets, especially if shortening is hot, to prevent splashing.

3.Open the fryer door and attach the drain pipe to the drain valve.

4.Select a container of sufficient capacity and place it below the drain pipe.

5.If you are using a filter bag, tie it securely to the drain pipe. If other filter medium is used, place it in the container.

6.Open the drain valve carefully so the oil stream is directed through the filter.

7.With a small amount of warm shortening, flush out scraps and sediment in the fry tank. Drain the tank thoroughly and wipe clean.

8.If it is necessary to clean the tank more thoroughly follow the procedure shown in CLEANING

— WEEKLY OR AS REQUIRED.

9.Close the drain valve.

10.Pour the strained shortening back into the vat.

11.Add shortening to the "oil level" line.

— 10 —

Page 9 Page 11
Page 10
Image 10
Wolf FWTF-42 operation manual Shortening Life, Daily Filtering, Filtering Procedure
Page 9 Page 11

FWTF-42 specifications

The Wolf FWTF-42 is a remarkable addition to the world of advanced firearms, representing a fusion of cutting-edge technology, innovative design, and user-focused features. Designed to meet the demands of both tactical and recreational shooting enthusiasts, the FWTF-42 is becoming increasingly popular among professionals and hobbyists alike.

At the core of the Wolf FWTF-42 is its robust construction, which employs high-strength materials that ensure durability while keeping the weight manageable. This lightweight design allows for enhanced maneuverability, making it ideal for dynamic shooting scenarios. The firearm's sleek profile not only contributes to its aesthetic appeal but also aids in the ease of carrying and handling.

One of the standout features of the FWTF-42 is its precision-engineered barrel. The barrel is crafted to provide exceptional accuracy and consistency, incorporating advanced rifling techniques that stabilize projectiles for superior performance. This results in tighter shot groups and improved hit probability, critical for both competition shooting and tactical applications.

The Wolf FWTF-42 is also equipped with an adjustable gas system, allowing shooters to fine-tune the firearm's operation for various conditions and ammunition types. This adaptability not only enhances reliability but also minimizes recoil, providing a smoother shooting experience. The gas system complements the firearm’s overall performance, allowing users to maintain control and accuracy even in high-pressure situations.

In terms of ergonomics, the FWTF-42 has been designed with the shooter in mind. The customizable grip options and the adjustable stock enhance comfort and facilitate a better fit, accommodating a wide range of users. Furthermore, the firearm is outfitted with a modular rail system that allows for the easy attachment of accessories, such as optics, lights, and grips, ensuring versatility for numerous shooting scenarios.

The safety mechanisms incorporated into the Wolf FWTF-42 are designed to provide peace of mind to the user. With integrated safety features and intuitive controls, the firearm promotes responsible handling without compromising performance.

In summary, the Wolf FWTF-42 combines advanced materials, precision engineering, and user-centric design. Its accuracy, adaptability, and ergonomic features mark it as a formidable option for both professional and recreational shooters looking for a reliable and elegant firearm. With its innovative technologies, the FWTF-42 stands out as a testament to modern firearm design.
Top Page Image Contents