Ovens Mounted on Casters

If the oven is to be installed on casters, assemble the casters to the legs provided. Then attach the caster-leg units to the oven at each corner using the 24 bolts and lockwashers (six bolts and lockwashers per leg). Place the locking casters on the front legs and nonlocking casters on the rear legs.

ASSEMBLING THE STAND TO THE OVEN

Attach each of the four leg assemblies to the bottom of the oven with the 24 bolts and lockwashers (six per leg). Carefully raise the oven to its normal position. Attach the undershelf to the legs with eight bolts and lockwashers (two per leg).

Install the rack guides into the undershelf at desired locations (for pan or flat rack), then attach the rack supports to the top end of the rack guides. Attach rack supports to the leg assembly by removing one middle bolt and reattaching back through the end holes in the rack support (Fig. 2).

ASSEMBLING STACKED OVENS

Unpack the ovens and the stack kit. Position the oven to be used as the bottom oven on its left side for access to the oven bottom, taking care not to scratch or damage it.

Attach the four leg assemblies with the 24 bolts and lockwashers (six per leg).

Place the lower oven (with legs) on the floor and remove two 7/16" (11 mm) diameter knockouts on each side of the top cover.

Install two locating studs to the bottom of the top oven per stacking kit instructions.

Move the oven with legs to the installed position. Place the upper oven on top of the lower oven using the locating studs.

Remove the optional rear panel, if provided, from the TOP oven. Install the Stacking Flue (Fig. 3) with the four screws provided. Replace the top oven rear panel, if provided.

LEVELING

BACK

FRONT

PL-53274

Fig. 2

STACKING FLUE

PL-53463

Fig. 3

Make sure that the oven racks are level in the final installed position. If the oven is installed on legs, turn the adjustable feet in or out to level the oven front-to-back and side-to-side. If the oven is installed on casters, loosen set screws and turn casters in or out to level the oven front-to-back and side-to-side. Retighten set screws after leveling.

– 4 –

Page 3 Page 5
Page 4
Image 4
Wolf ML-136825 owner manual Ovens Mounted on Casters, Assembling the Stand to the Oven, Assembling Stacked Ovens, Leveling
Page 3 Page 5

ML-136825 specifications

The Wolf ML-136825 is a remarkable piece of machinery that showcases the innovative spirit of modern engineering. This multi-purpose machine has been designed for efficiency and versatility, making it an ideal choice for various applications across industries, including construction, agriculture, and environmental management.

One of the standout features of the Wolf ML-136825 is its robust build quality. Constructed with high-strength steel, the machine is built to withstand harsh working conditions and heavy loads. Its durable design ensures longevity while requiring minimal maintenance, making it a cost-effective investment for businesses looking to enhance their operational capabilities.

The machine is equipped with a powerful engine that delivers impressive performance. This engine is designed to provide exceptional torque and speed, allowing the Wolf ML-136825 to handle demanding tasks with ease. Additionally, the engine meets stringent emission standards, making it an environmentally friendly option for those concerned about their carbon footprint.

An important technological aspect of the Wolf ML-136825 is its advanced hydraulic system. This system enhances the machine’s functionality by providing precise control over attachments and implements. Operators can easily switch between tools, allowing the machine to perform various tasks such as digging, lifting, and grading with minimal downtime. The intuitive controls ensure that even less experienced operators can quickly become proficient in using the machine.

Safety is a primary consideration in the design of the Wolf ML-136825. The machine is equipped with a comprehensive safety system that includes features such as rollover protection, emergency shutoff mechanisms, and enhanced visibility for operators. This focus on safety ensures that operators can work confidently, reducing the risk of accidents on the job site.

Moreover, the Wolf ML-136825 is designed with operator comfort in mind. The spacious cabin features ergonomic seating and advanced climate control systems, allowing operators to work for extended periods without experiencing fatigue. Large windows provide excellent visibility, enabling operators to maintain awareness of their surroundings.

In summary, the Wolf ML-136825 is a robust, versatile machine that excels in performance and safety. Its powerful engine, advanced hydraulic system, and operator-friendly design make it a top choice for various applications, ensuring that businesses can operate efficiently while maintaining high standards of safety and comfort.
Top Page Image Contents