Wolf Appliance Company CT15E, CT36EU, CT30EU manual mode

W O L F ELECTRIC COOKTOP U S E & C A R E

COOKTOP O P E R AT I O N

B R I D G E - Z O N E E L E M E N T G R I D D L E U S E

Always use a setting of 8 bars or less on the bridge-zone element when cooking on a griddle. Higher settings are not needed and can damage the cooktop and cookware.

To preheat the griddle, set the bridge element at 14 bars for 5 minutes, then turn the heat down to 8 bars for cooking.

A griddle, open roaster, or fish poacher should not be used when the bridge-zone is off or on any of the other combination of circular heating elements.

TIMER O P E R AT I O N

The electric cooktop features a countdown timer located in the control panel. Refer to the illustration below.

The timer may be set to any one-minute increment from 1 to 99. Once set, the remaining time will be illuminated in the control panel as it counts down. The timer is available for use in any mode except Lock

mode.

To turn on the timer, touch ”+” on the timer control.

Touch and hold ”+” or ”–” until the desired time is reached. The timer will start 3 seconds after the last change in value.

When the timer reaches 0, the unit will sound. The reminder will continue to sound until CLEAR is pressed.

The illustration below shows the control panel of Model CT36E.

									H
									IG
									H
							N
							O
						F
						F
						O		2
							E
						IM	N
							ZO		3
						S
								E
								N
					H		ZO
					IG
					H
				N					F
				O					F
			F						O
			F
			O	E		H
				G		IG	R
		IM		ID		H	A
				R			E
		S		B	N		L
							C
				O
				F
				F
H				O				O
IG			IM
H
			S
			H
		IG
		H
	N
	O
F
F
O		2
	E
	N
	ZO
									Timer display
									area

Countdown timer

16