Wolf Appliance Company PI663418 Pro Island Ventilation Hood, Planning Information, 30 TO

Planning Information

Pro Island Ventilation Hood

M O D E L P I 6 6 3 4 1 8 ( R )

D U C T I N G C O N S I D E R A T I O N S

Wolf Pro island hoods are shipped without the blower assembly. Internal, in-line and remote blower assemblies are available.

IMPORTANT NOTE: Install this ventilation hood only with a Wolf blower.

Pro island hoods have a vertical discharge location with 10" (254) round duct. A transition with backdraft damper is included. The hood will operate most efficiently when ductwork does not exceed 50' (15 m) in length.

Local building codes may require the use of make-up air. Consult your local HVAC profes- sional for specific requirements in your area.

IMPORTANT NOTE: Wolf Pro island hoods must be vented to the outside. Use only metal ductwork.

Refer to the illustration below for ducting considerations for Pro island hoods.

	DUCTWORK INSTALLATION
	THROUGH ROOF
ROOF CAP OR REMOTE BLOWER
10" ROUND DUCT
TRANSITION	SOFFIT, CABINET OR
141/8"W x 9"D TO 10" ROUND	DUCT COVER
7"H (INCLUDING FLANGES)
	VERTICAL
	DISCHARGE
18" (457)	ISLAND HOOD
HEIGHT OF HOOD
	34" (864)
	DEPTH OF HOOD
30" TO 36"
(762–914)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
VERTICAL DISCHARGE ONLY FOR ISLAND HOODS.

Ducting for Pro island hoods.

Dimensions in parentheses are in

millimeters unless otherwise specified. 6