Wolf Appliance Company WWD30 dimensions Warming Drawer, Planning Information, M O D E L W W D

Planning Information

Warming Drawer

M O D E L W W D 3 0

C O M B I N A T I O N I N S T A L L A T I O N

The Wolf warming drawer with E Series stainless steel drawer front may be installed in combina- tion with a 30" (762) E Series single oven and convection microwave oven with 30" (762)

E Series trim. Refer to the illustration below for specifications.

Wolf recommends using a 33" (838) wide cabinet for this installation. Also, you need a minimum 24" (610) of usable cabinet depth for the oven.

IMPORTANT NOTE: Unless you are using cabinets deeper than 24" (610), it is recom- mended that the electrical supply for the built-in oven be placed in an adjacent cabinet within reach of the conduit.

The base platform for the warming drawer must be able to support 200 lbs (91 kg), the platform for the oven must be able to support 250 lbs (113 kg) and the microwave platform must be able to support 125 lbs (57 kg).

An anti-tip block or platform must be installed to prevent the warming drawer from tipping forward when the drawer is opened. The warming drawer must be fully enclosed, top and bottom.

For electrical requirements and additional specifi- cations, refer to the built-in ovens and microwave sections of our website, wolfappliance.com.

Also refer to the installation instructions provided with the warming drawer front and microwave trim kit for detailed specifications.

201/8"min

1811/16"

201/8"min

1811/16"

(511)

(475)

(511)

(475)

17/16"

17/16"

min (37)

min (37)

24"min

273/16"

24"min

273/16"

(610)

(691)

(610)

(691)

7/8" (22)

2"(51) x 2"(51)

PLATFORM

ANTI-TIP BLOCK

91/8" (232)

7/

8"

91/8" (232)

23/8"

(22)

(60)

237/8"min (606)

237/8"min (606)

33" (838)

RECOMMENDED CABINET WIDTH

30"min (762)

	271/2" (699)
		MICROWAVE
OPENING WIDTH							4"
						(102)
				5"	E
			(127)
		281/2" (724)
OVEN OPENING WIDTH
ELECTRICAL LOCATION					4"
WITHIN OPENING
APPLIES ONLY TO					(102)
CABINETS DEEPER
THAN 24" (610)				5"	E		E
			(127)

5"	E
(127)
4"
(102)

285/8" (727)

WARMING DRAWER

OPENING WIDTH

PLATFORM APPLICATION	ANTI-TIP BLOCK APPLICATION	NOTE: Unless you are using cabinets deeper than 24" (610), it is recommended that the
		electrical supply for the oven be placed in an adjacent cabinet within reach of the conduit.

Specifications for a warming drawer with E Series stainless steel drawer front installed with a 30" (762) E Series single oven and convection microwave with 30" (762) E Series trim.

Dimensions in parentheses are in
millimeters unless otherwise specified.	10