Wolf Appliance Company WWD30 dimensions 241/16

Planning Information

Warming Drawer

M O D E L W W D 3 0

C O M B I N A T I O N I N S T A L L A T I O N

The Wolf warming drawer with integrated drawer front may be installed in combination with a 36" (914) L Series single oven and convection microwave oven with 36" (914) L Series trim. Refer to the illustration below for specifications.

IMPORTANT NOTE: Keep in mind that the width of the custom panel for the warming drawer with integrated drawer front will vary according to the specific installation.

Wolf recommends using a 39" (991) wide cabinet for this installation. Also, you need a minimum 24" (610) of usable cabinet depth for the oven.

IMPORTANT NOTE: Unless you are using cabinets deeper than 24" (610), it is recom- mended that the electrical supply for the built-in oven be placed in an adjacent cabinet within reach of the conduit.

The base platform for the warming drawer must be able to support 200 lbs (91 kg), the platform for the oven must be able to support 250 lbs (113 kg) and the microwave platform must be able to support 125 lbs (57 kg).

An anti-tip block or platform must be installed to prevent the warming drawer from tipping forward when the drawer is opened. The warming drawer must be fully enclosed, top and bottom.

For electrical requirements and additional specifi- cations, refer to the built-in ovens and microwave sections of our website, wolfappliance.com.

Also refer to the installation instructions provided with the warming drawer front and microwave trim kit for detailed specifications.

24" min (610)

25" min (635)

CABINET DEPTH

CABINET DEPTH

201/8"min

1811/16"

201/8"min

1811/16"

(511)

(475)

(511)

(475)

1"min

1"min

(25)

24"min

(25)

24"min

(610)

241/16"

(610)

241/16"

(611)

(611)

2"(51) x 2"(51)

2"(51) x 2"(51)

ANTI-TIP BLOCK

ANTI-TIP BLOCK

101/4"

101/4"

(260)

(260)

9

7/8"

(251)

9

7/8"(251)

OPENING

OPENING

HEIGHT

HEIGHT

11/2"min*

11/2"min*

(38)

24" (610) + THICKNESS

(38)

24" min (610)

OF DRAWER FACE

OPENING DEPTH

FOR OPENING DEPTH

39" (991)

RECOMMENDED CABINET WIDTH

36"min (914)

	333/8" (854)
	MICROWAVE			4"
OPENING WIDTH
			(102)
5"		E
(127)

341/2" (876 )

36-INCH OVEN

OPENING WIDTH

5"	E
(127)
4"
(102)

291/2" (749)

WARMING DRAWER

OPENING WIDTH

OVERLAY APPLICATION FLUSH INSET APPLICATION NOTE: Refer to the 36" (914) built-in single oven specifications for electrical location.

*Dimension may increase depending on the size of the drawer front panel.

The width of the custom panel for the warming drawer with integrated drawer front will vary according to the specific installation, but the rough opening width will remain 291/2" (749).

Specifications for a warming drawer with integrated drawer front installed with a 36" (914) L Series single oven and convection microwave with 36" (914) L Series trim.

Dimensions in parentheses are in
millimeters unless otherwise specified.	11