HORIZONTAL MOUNTING

The horizontal WARNING mounting option is to be

used for grinding, buffing, sanding, and flex-shaft operations only. Do not attempt to use your Universal Drill Press Stand as a horizontal drill press. Failure to comply may result in serious injury.

See Figure 7 for reference.

1.Install your drill while the head assembly is mounted vertically (see "Standard Mounting" instructions).

2.Loosen adjustment handle and remove head assembly from post.

Adjustment Handle

Figure 7

3.Rotate head assembly 90°.

4.Replace head assembly onto post and tighten adjustment handle securely.

OPERATING INSTRUCTIONS

Rotating machinery can WARNING cause serious injury.

Keep hands, body parts, and clothing away from rotating heads. Please read, understand, and follow all safety instructions included with your drill or hobby tool.

Operation of the Universal Drill Press Stand is simple and straightforward.

1.With the drill turned on, use the handle to feed the bit into the material. Let the bit cut at its own speed.

2.Adjust the depth the material is being drilled into with the depth adjustment knob. The depth is adjustable in 1/8" increments.

3.When operating in the horizontal mode, do not use as a drill press.

4.With the drill turned on, use attachments for grinding, wire brushing, sanding, and buffing.

5.Make sure to follow all power tool safety instructions and keep hands, body parts, and clothing away from the rotating heads.

10

Page 10
Image 10
Wolfcraft 3408 manual Operating Instructions, Horizontal Mounting