DRILL MOUNTING
Tools Required
• Flat blade Screwdriver
Standard Mounting
See Figure 6 for reference.
1.Adjust the
2.Open the chuck on the drill to its widest position.
3.Insert the drill through the quick- release clamp and onto the shaft. Tighten the drill chuck.
4.Loosen the knob at the top of the adjustment bracket.
5.Move the adjustment bracket so that it is in contact with the drill. Tighten the knob on the adjustment bracket securely.
6.Secure the drill to the adjustment bracket by tightening the quick- release clamp. Make sure the drill vent slots remain uncovered to provide proper cooling for the drill motor.
7.Route cord through the mount located on the head assembly. See Figure 6 inset.
Detail of Cord Mount |
|
| Chuck |
| Handle |
| Adjustment |
Chuck Key | Knob |
Storage Hole | Adjustment |
| |
| Bracket |
| Handle Screw |
Adjustment |
|
Handle |
|
Depth |
|
Adjustment | |
Assembly | |
| Clamp |
Post | Drill Chuck "L" |
| Adapter Bracket |
Base |
|
Bolt |
|
Base |
|
Mounting |
|
Holes |
|
Figure 6
9
