Know Your
Immersion Blender/Chopper
Assembly and Use
of Hand Blender Attachment
Chopper bowl | Speed Selector • |
|
|
and Lid • |
|
|
|
Bowl cover • | Motor Base • | Blending | Wire |
|
| Rod • | Whisk • |
Mixing | On / Turbo |
|
|
Beaker • | Buttons • |
|
|
Chopping Blade • | Aerator Disc • | Blending Disc • | Grinding Blade • |
(for chopping bowl only) |
|
|
|
Attachment removal tool • | Multipurpose Blade • |
| |
figure 1
figure 2
Shaft Pin
Blade
Groove
figure 3
figure 4
1Ensure the motor base is unplugged. Attach hand blender rod to motor base by holding the motor base with the arrows slightly to the right of the arrows on the blending rod. Turn the motor base counter clockwise while holding the blending rod firmly. (see figure 1)
2Place one of the small metal attachments in the shaft of the mixing rod. Make sure that the pin located on the shaft fits into the groove of the attachment. Press down until attachment locks in place. (see figure 2)
Caution: Blades are sharp. Handle with care.
3Place food in suitable container for mixing (beaker, bowl, pan). For best results, solid foods should be no larger than 1/2" cubes.
4Plug into
5Immerse the hand blending rod into your ingredients. Turn the speed selector to “1” first. Press the ON/OFF switch to begin blending; then gradually increase speed, as needed. (see figure 3) Slowly move the rod up, down and sideways through the food . Note: Never
lift the hand blender attachment out of your ingredients while the unit is running to avoid splatter of your food.
6At any time during the blending process, you can press the Pulse button to increase the blender to its maximum speed
7Do not operate the motor continuously for more than one minute when using the blender.
8When you are finished, simply release the ON/OFF switch, unplug the motor base, twist the hand blending rod to remove.
9To remove blades from the blender rod, use your blade removal tool as shown in figure 4. Slide the opening of the tool underneath the blade and press down.
5 | 6 |
