MOUNTING INSTRUCTIONS
Safety is a primary concern in the design and manufacture of our products. Unfortunately, our efforts to provide safe equipment can be wiped out by a single careless act of an operator.
In addition to the design and configuration of equipment, hazard control and accident preven- tion are dependent upon the awareness, con- cern, prudence and proper training of personnel involved in the operation, transport, maintenance and storage of equipment.
It has been said “The best safety device is an informed, careful operator.” We ask you to be that kind of an operator.
The 111307 Loader Mounting Kit fits John Deere 5500 tractors for use with a DuAl 195 Loader. The 118460 Loader Mounting Kit fits John Deere 5500 tractors for use with a DuAl 215 loader. The 199758 Hydraulic Hose Kit fits John Deere 5500 tractors with 195 or 215 Loaders. Refer to DuAl 195 or 215 Loader Operator’s Manual for loader assembly instructions. Use instructions in this manual for installing loader mounting kits and hydraulic hose kit.
Shut off engine and set parking brake during installation.
If equipped, remove the front end weight bracket and toolbox from tractor.
WARNING
J Safety instructions are important!
Read this manual and the DuAl Loader manual and follow all safety rules and safety decals. (Replacement manuals are
available from dealer or call
JDo not modify or alter or permit any- one else to modify or alter the loader, loader mounting kit, any of its compo- nents or any loader function.
JKeep all persons away from operator control area while performing adjust- ments, service or maintenance.
CAUTION
JAlways wear relatively tight and belted clothing to avoid entanglement in moving parts. Wear sturdy,
Front Mount Attachment -- 195 Loader
Attach the front mount (1) to the front of the tractor bolster and secure with four cap screws (16) and lockwashers (15). Tighten all fasteners securely.
1
15 16
CM581
1. Front Mount
15.3/4”Lockwasher
16.3/4 NC x 3”Hex head cap screw GR5
Figure 1. Front Mount Attachment
Front Mount Attachment -- 215 Loader
Attach the right front mount (5) to the tractor frame and secure with two cap screws (19) and lockwashers (12). Repeat for opposite side. Tighten all fasteners securely.
5
19 12
CM682
5.Right front mount
12.5/8”Lockwasher
19.5/8 NC x 2”Hex head cap screw GR5
Figure 2. Front Mount Attachment
6 |