To provide clearance for mounting the 215 loader, adjust the front tractor tires to a minimum 67”tread or to the manufacturer’s widest recommended setting. This also provides increased tractor stability.
| 67” |
| MINI- |
SC686 | MUM |
Figure 3. Tire Adjustment -- 215 Loader Only
Rear Mount Attachment -- 195 Loader
Attach the front of the left rear mount (3) to the side of the tractor frame as shown and secure with two cap screws (14), washers (13) and lockwashers (12). Secure the rear of the left rear mount to the tractor with four cap screws (18) and lockwashers (17). Repeat for opposite side. Do not tighten fasteners until all adjustments are complete.
17 | 18 |
Rear Mount Attachment -- 215 Loader
Attach the front of the left rear mount (3) to the tractor frame as shown and secure with two cap screws (14), washers (13) and lockwashers (12). Secure the rear of the left rear mount to the tractor with four cap screws
(18)and lockwashers (17). Repeat for opposite side. Do not tighten fasteners until all adjustments are complete.
17 18
14
3
13
12
CM684
3.Left rear mount
12.5/8”Lockwasher
13.5/8”Standard flat washer
14.16mm x 2P x 35mm Hex head cap screw
17.20mm Lockwasher
18.20mm x 2.5P x 50mm Hex head cap screw GR5
Figure 5. Rear Mount Attachment
Crossmember Link Attachment
Attach the crossmember link (4) to the rear mounts as shown and secure with cap screws (11), washers (13), lockwashers (12) and hex nuts (10). Tighten all fasteners securely.
|
| 3 |
12 | 13 | 14 |
|
| CM583 |
3. | Left rear mount |
12. | 5/8”Lockwasher |
4
13 12 11 10
CM582
13. | 5/8”Standard flat washer |
14. | 16mm x 2P x 35mm Hex head cap screw |
17. | 20mm Lockwasher |
18. | 20mm x 2.5P x 50mm Hex head cap screw |
Figure 4. Rear Mount Attachment
4. .50 x 6.00 x
10.14mm x 1.5P Hex nut
11.14mm x 1.5P x 50mm Hex head cap screw
12.5/8”Lockwasher
13.5/8”Standard flat washer
Figure 6. Crossmember Link Attachment
7 |