Woods Equipment 59HC-1 manual Operation, Parts, Leaf Mulcher

				LEAF MULCHER
REF	PART		QTY	DESCRIPTION
A	7080		1	Model 59 leaf mulcher -or-
A	13482		1	Model L306 leaf mulcher
1	-----		1	Leaf weldment (if this part is worn
				out, order a complete new leaf
				mulcher)
2	7076		1	Angle lug (for model 59)
3	13224		1	Right attachment bracket (for
				model L306)
4	13225		1	Left attachment bracket (for model
				L306)
5	23218		1	3/8 Scdl 40 pipe 5/8 long (for use
				only on 59 w/bent down frt frm)
7	839	*	1	3/8 NC x 1 HHCS GR5
8	25475	*	1	3/8 NC x 1-1/2 HHCS GR5
9	565	*	1	3/8 Flat washer
10	838	*	1	3/8 Lock washer
11	835	*	1	3/8 NC Hex nut
			*	Standard hardware,
				obtain locally

Operation

To do a satisfactory job of leaf mulching, the mower should be adjusted so blades are about 1-1/2” above ground and the back of the mower slightly lower than the front. The mower should be run at full RPM with tractor in first or second gear.

29931 (Rev. 6/29/2007) Parts 21