4.Inspect battery case for cracks or leaks; replace battery if necessary.

5.Test battery with hydrometer; recharge battery if less than 75% charge is indicated.

6.Add water if necessary.

7.Check that the positive terminals on the battery, starter and alternator are properly covered with protective boots from exposure to grounding.

CLUTCH BURNISHING

NOTICE

■A new clutch or one that has not been used for three months, will require burnishing to dress drive surface. The clutch could fail if you do not accom- plish the following procedure.

1.Place steering control handles in the NEUTRAL position. Start engine and run at half throttle.

2.Turn clutch switch (PTO) “ON” 30 seconds and “OFF” for 30 seconds. Repeat cycle 20 times.

NOTE: The 30 seconds “OFF” allows clutch sur- face to cool.

RETURN TO OPERATION

„Make sure shields and guards are properly installed and in good condition. Replace if damaged.

CAUTION

„Remove accumulated debris from this equip- ment, power unit, and engine to avoid fire hazard.

CLEANING

After Each Use

●Remove large debris such as clumps of dirt, grass, crop residue, etc. from machine.

●Inspect machine and replace worn or damaged parts.

●Replace any safety decals that are missing or not readable.

Periodically or Before Extended Storage

●Clean large debris such as clumps of dirt, grass, crop residue, etc. from machine.

●Remove the remainder using a low-pressure water spray.

1.Be careful when spraying near scratched or torn safety decals or near edges of decals as water spray can peel decal off surface.

2.Be careful when spraying near chipped or scratched paint as water spray can lift paint.

3.If a pressure washer is used, follow the advice of the pressure washer manufacturer.

●Inspect machine and replace worn or damaged parts.

●Sand down scratches and the edges of areas of missing paint and coat with Woods spray paint of matching color (purchase from your Woods dealer).

●Replace any safety decals that are missing or not readable (supplied free by your Woods dealer). See Safety Decals section for location drawing.

™

20 Owner Service

MAN0646 (7/6/2007)

 

 

Page 19 Page 21
Page 20
Image 20
Woods Equipment FZ25D manual Clutch Burnishing, Return to Operation, Cleaning, After Each Use
Page 19 Page 21

FZ25D specifications

The Woods Equipment FZ25D is a versatile and powerful piece of machinery designed for professional landscapers and grounds maintenance operations. This compact yet robust zero-turn mower boasts a range of features that make it ideal for tackling various mowing tasks efficiently and effectively.

One of the standout features of the FZ25D is its powerful engine. Equipped with a reliable engine, it ensures excellent performance and reliability during operation. With a horsepower rating that enhances its cutting power, the FZ25D can easily handle tough grass and uneven terrains, providing a smooth and immaculate finish to manicured lawns.

The zero-turn capability of the FZ25D is another significant advantage, allowing for unparalleled maneuverability. It features a dual-hydrostatic transmission that offers quick and responsive turns, enabling operators to navigate around obstacles, flower beds, and tight corners with ease. This capability reduces mowing time and increases productivity, making it a preferred choice for professionals.

The mower deck of the Woods Equipment FZ25D is designed for optimal cutting performance, featuring a durable construction that withstands rigorous use. Its cutting width allows for a large mowing area covered in a single pass, ensuring efficiency in operation. Additionally, the cutting height can be easily adjusted to suit various grass types and conditions, providing flexibility for different mowing scenarios.

Comfort is paramount in the design of the FZ25D. The operator station is ergonomically designed, offering a comfortable seating position with excellent visibility. The controls are intuitively placed, making it easy for operators to manage their mowing tasks without unnecessary strain. Furthermore, the mower is designed with vibration dampening technology to reduce operator fatigue, allowing for extended periods of use.

Maintenance is straightforward with the Woods Equipment FZ25D due to its easily accessible components. Users can quickly perform routine checks and necessary servicing, ensuring the mower remains in optimal working condition.

In summary, the Woods Equipment FZ25D combines power, maneuverability, and comfort, making it an excellent choice for landscaping professionals. Its advanced features, including a robust engine, zero-turn capability, durable cutting deck, and ergonomic design, cater to the demands of both commercial and residential mowing tasks, providing unmatched efficiency and performance.
Top Page Image Contents